ACCESSORIES CLEARANCE
Motone Triumph 400 Wrap-Around Fork M8 (8mm) Indicator Turn Signal Bracket Clamps - Pair - 54mm Fork Diameter - Black
Custom CNC milled from aviation grade billet 6061t aluminium.
Includes a custom turned billet nut which slides down over the thread of your turn signal stem.
The clamps are designed to be used with any Indicators which have a M8 (8mm) thread - probably the most common size, and also the size we use on both the PICO and the ICON Indicators
Available here Anodised Black PAIR
Compatible with the following models:
- FITS TRIUMPH SCRAMBLER 400 X / SPEED 400 (54mm fork)
- FITS ALL BIKES WITH 54M FORKS
ALSO INCLUDES M8 SLEEVED BOLTS
SKU: CL8-054B
Motone Under Seat/Rear Frame Under Seat Indicator Brackets LC
These are the latest brackets we have made allowing you to fit indicators to the rear of your bike using the 2 bolt holes on either side at the top of your frame. These can be run in various combinations with our parts, depending on the rear mudguard of your bike and which make indicators you have and the length of threads they run
As is we have designed the holes to bolt on using any
Indicators with 8mm Threads
Indicators with 10mm Threads
OEM Triumph LED Indicators
As well as the above if you have a high and wide rear fender and want to fit with indicators that have particularly long threads, or you simply want to space your indicators our wider apart then you can fit this part in combination with our Billet Indicator Adapters ADT002 (for 8mm Indicators), or ADT003 (for 10mm Indicators)
Compatible with the following models:
- Street Twin
- Street Cup
- Street Scrambler
- T100 LC
- T120
- Thruxton 1200
- Speed Twin
Note if you have another accessory using these holes already it may still be possible to fit them both concurrently - use some washers under the seat latch to raise it up a few mm in this instance
SKU: MMU521
Motone Wrap-Around Fork Indicator Turn Signal Bracket Clamps - Pair - 41mm - Black
Custom CNC milled from aviation grade billet 6061t aluminium.
Includes a custom turned billet nut which slides down over the thread of your turn signal stem
Available here Anodised Black PAIR
Compatible with the following models:
- HINKLEY BONNEVILLE T100
- SE
- SCRAMBLER
- THRUXTON
- STREET TWIN
- T120 : 2001-2016 - Fits both CARB and EFI bikes.
FITS ALL BIKES WITH 41MM FORKS
ALSO INCLUDES 1.5MM AND 1.25MM BOLTS
SKU: PXN041B
Motone Wrap-Around Fork M10 (10mm) Indicator Turn Signal Bracket Clamps - Pair - 47mm - Black (Bobber)
Custom CNC milled from aviation grade billet 6061t aluminium.
Includes a custom turned billet nut which slides down over the thread of your turn signal stem.
The clamps are designed primarily to be used with Motone indicators which run on a M10x1.50 stainless bolt
We also include some threaded nuts at M10x1.25 pitch as well so as long as your signals run on a M10 bolt and have about 30mm length of thread other brand indicators may work with them as well.
Available here Anodised Black PAIR
Compatible with the following models:
- BOBBER BLACK (47mm fork)
- FITS ALL BIKES WITH 47MM FORKS
ALSO INCLUDES M10x1.5MM AND M10x1.25MM SLEEVED BOLTS
SKU: PXN047B
New Rage Cycles Triumph Bobber Standard Tail Tidy
Take your Triumph Bobber to the next level with our DIY fender eliminator. NRC kit comes with a complete LED tail light, license plate bracket, and LED license plate light for a full LED replacement. This most popular Triumph model required a design with a creative twist to it. Why not add to the styling with our unique and creative design? Comes with all necessary hardware to install, and OEM connectors to make for a simple bolt-on / plug-in fender eliminator.
Installation requires you to drop the rear wheel to slide out the axle if you have the standard fender.
Compatible with the following models:
- Bobber (2017 upwards)
SKU: TBFE
TEC Bikes Pair of Air Injection stainless blanking plugs
Pair of neat stainless blanking plugs and sealing washers for the air injection ports on the cylinder head.
Helps prevent ‘Blueing’ of pipes and popping on the overrun.
Highly recommended with aftermarket exhausts.
Can also be used to blank off lambda sensor holes in the exhaust.
SKU: AL-PLUGS
TEC Bikes Heavy Load Springs Scrambler 1200 XC/XE
A pair of specially made heavy load springs for the Triumph Scrambler 1200 XE/XC models.
Designed for heavier than average rider or rider who travels with passenger/heavy luggage.
Heavier riders or those carrying luggage cannot adjust the static load height to the manufacturers recommendation with the OE springs fitted. We have developed these 25% uprated springs to allow this.
Top-quality UK manufactured springs.
Powder coated, hard wearing, semi-gloss finish.
Very easy to install with no special equipment required.
NOTE – These springs fit Ohlins type shocks only, NOT Marzocchi, which are used on 2024 models!
TEC bikes Lowering Springs – Scrambler 1200 XC/XE
A pair of specially made lowering springs for the Triumph Scrambler 1200 XE/XC models.
Will lower the rear static ride height approximately 25-35mm with an average weight solo rider.
Top-quality UK manufactured springs.
Powder coated, hard wearing, semi-gloss finish.
Very easy to install with no special equipment required.
NOTE – These springs fit Ohlins type shocks only, NOT Marzocchi, which are used on 2024 models.
SKU: LOW-SPR-1200
Handlebar riser for Tiger 1200 (2022-)
:The adjustment range of the handlebar angle is increased, which further increases rider comfort.
The Touratech handlebar riser also makes riding while standing less tiring, which is of tremendous benefit to taller riders in particular.
Long stretches on the motorway are less nerve-racking, and even fast, difficult sections off-road are easier to handle.
Compatable with the following Models:
Tiger 1200 (2022+)
SKU: 01-424-5255
Triumph Rear Bullet LED Indicators
The piano black moulded body with turned aluminium bezel incorporates 6 High Power LEDs which make signalling highly visible in a compact 40mm diameter body
Sold as a pair, they offer a comprehensive solution to upgrading your motorcycle's lighting.
Compatible with the following models:
- Speed 400
- Scrambler 400X
SKU: 36TA0027
Triumph Lower Engine Bars
The Triumph lower engine bars are constructed using tubular mild steel and come in a classy black textured finish
They offer additional protection in the event of a fall and compliment the overall styling
They can be mounted individually or with the upper bars
Compatible with the following models:
- Scrambler 400 X
- Speed 400
SKU:36TA0032
Triumph Upper Engine Bars
Triumph Upper Engine Bars constructed from tubular mild steel to provide extra protection and style to your bike
Their versatile design allows for individual mounting or pairing with the lower bars, offering comprehensive safeguarding for the bike’s critical components.
Compatible with the following models:
- Scrambler 400X
- Speed 400
SKU: 36TA0038
Triumph Coated Screen
The polycarbonate flyscreen is injection moulded and hard coated for durability and optical clarity and offers increased wind protection
Compatible with the following models:
- Scrambler 400X (Requires Fitting Kit 36TA0058)
- Speed 400 (Requires Fitting kit 36TA0041)
SKU: 36TA0040
Triumph Knee Pads
A durable, self-adhesive rubber knee pad which offers additional protection to the side of the tank from scuffs and scratches, increasing rider comfort and grip
With Scrambler inspired styling and featuring embossed Triumph logo detail and a textured black finish
Compatible with the following models:
- Speed 400
SKU: 36TA0043
Triumph Bar End Mirrors Kit
Designed to provide clear and reliable rearview visibility. Crafted from cast and machined aluminium, these bar end mirrors exude durability and precision. The sleek black anodized finish not only provides a modern aesthetic but also enhances corrosion resistance, ensuring long-lasting quality in various riding conditions.
Compatible with the following models:
- Scrambler 400 X
- Speed 400
SKU: 36TA0043
Triumph Headlight Grille and Bezel
The headlight grille not only exemplifies the signature Triumph style but also serves a practical purpose by ensuring optimal protection for your motorcycle’s headlight. Crafted with a durable moulded construction.
Compatible with the following models:
- Speed 400
SKU: 36TA0046
Triumph Radiator Guard
Black painted steel mesh grille for enhanced radiator protection
Designed to blend seamlessly into the styling of the bike but still offer further protection from the road elements
Compatible with the following models:
- Speed 400
SKU: 36TA0050
Triumph Front Bullet Indicators
The piano black moulded body with turned aluminium bezel incorporates 6 High Power LEDs which make signalling highly visible in a compact 40mm diameter body
Sold as a pair
Compatible with the following models:
- Scrambler 400 X
- Speed 400
SKU: 36TA0049
Triumph Sump Guard Kit
The aluminium Sump Guard offers additional protection to the engine sump
With a brushed silver finish, the lower section is pressed with laser cut sides
Supplied complete with all additional mountings and hardware
Compatible with the following models:
- Scrambler 400 X
- Speed 400
SKU: 36TA0051
Screen Fitting Kit for Speed 400
-The Triumph Screen Fitting Kit is an essential upgrade for riders seeking enhanced comfort and protection.
-Designed for easy installation, this kit provides a seamless way to attach a windscreen to your motorcycle, ensuring optimal wind protection and reducing rider fatigue on long journeys.
-The high-quality components, including robust brackets and precision-engineered mounting hardware, offer a secure and stable fitment for various Triumph models.
-This kit is engineered to provide excellent durability, even under harsh weather conditions, and is a must-have for those who want to ride with both style and comfort.
-Whether you're tackling a daily commute or heading out for a weekend adventure, the Triumph Screen Fitting Kit enhances your motorcycle's functionality without compromising its sleek appearance.
-With clear instructions and all necessary components included, you'll have your screen fitted in no time, giving you the freedom to enjoy smoother, more comfortable rides.
-Don't miss out on this practical upgrade that combines protection, convenience, and performance.
- Equip your Triumph with the Screen Fitting Kit and experience the ride like never before!
Compatible with the following Models: Speed 400
SKU: 36TA0147
