ACCESSORIES CLEARANCE
Triumph Billet Chain Adjuster Black
The Chain Adjustment Blocks are a machined and anodized black replacement for OE part.
Compatible with the following models:
- Daytona 675
- Daytona 675 R
- Street Triple
- Street Triple R
- Tiger 800
- Tiger XC
SKU: A9640045
Triumph Rear Wheel Adjuster Kit Black
A machined and anodised rear wheel adjuster kit to replace the original equipment part.
Compatible with the following models:
- Street Twin-Street Scrambler
- Thruxton (2016+)
- Thruxton R (2016+)
- Bonneville T120/Black
SKU: A9648036
Triumph Tiger 800 Aluminium Sump Guard Kit
Triumph Tiger 800 Sump Guard Kit MPN A9708392 is a heavy-gauge brushed aluminum sump guard designed to protect the sump and underside of the bike from the impacts associated with off-road riding. Drilled sections for a lightweight competition look. Includes all required hardware for correct fitting.
Compatible with the following models:
- Triumph Tiger 800 XRx
- Triumph Tiger 800 XR
- Triumph Tiger 800 XC
- Triumph Tiger 800 XRT
- Triumph Tiger 800 XCA
SKU: A9708392
Triumph Thruxton Knee Pads
A set of self-adhesive, durable rubber knee pads featuring the Triumph logo. The pads not only protect the side of the tank from rubbing, but also increase your comfort and grip.
Compatible with the following models:
- Thruxton
- Thruxton R
- Thruxton RS
- Thruxton TFC
SKU: A9790122
Triumph Bonneville Machined Headlight Bezel
A fully machined aluminium headlight bezel with machined groove detailing anodized in black.
Compatible with the following models:
- Bonneville Bobber
- Bonneville Bobber Black
- Bonneville Bobber TFC
SKU: A9838243
Top box Infill Kit Lucerne Blue
Closure panel Track in Lucerne Blue, Specific for the top case A9500894, to buy separately.
Compatible with the following models:
- Tiger Sport 660
SKU: A9500904-JF
Triumph Right Hand Pannier Rail
A single chrome plated waxed cotton pannier mounting rail designed to be fitted to the right hand side of the motorcycle (Pannier bag not included)
Compatible with the following models:
- Bonneville T120 (> AC6129)
- Bonneville T120 Black( > AD0138)
- Bonneville T100 (> AC5926)
- Bonneville T100 Black
- Bonneville T120 Black (AD0139 >)
- Bonneville T120 (AC6130 >)
- Bonneville T100 (AC5927 >)
- Street Cup
- Street Twin > 914972 (Not BR/IN) > 917474 BR/IN
- Street Twin 914973 > (Not BR/IN) & 917475 > BR/IN
- Street Twin (AB9715 >)
SKU: A9518221
Barkbusters Tiger 1200 Rally and GT Explorer Hardware & VPS Kit – Two Point Mount
AUSTRALIAN MADE – “Aussie Made Aussie Tough”.
Designed specifically for the TRIUMPH Tiger 1200 GT EXPLORER, RALLY EXPLORER (’22 on) with OEM (Original Equipment Manufacturer) specifications.
Two mounting points secure the full wrap around aluminium design.
Heat treated aluminium backbone for added strength and impact protection.
Bar end weights included.
Easy installation.
Compatible with the following models (2022+):
- Tiger 1200 GT Explorer
- Tiger 1200 Rally Explorer
SKU: MCBB1063
R&G Crash Protectors - Daytona 675 ('13-)
Utilising existing engine mounts and cleverly designs spacers and metal block work to install R&G crash protectors offer essential protection to the bike frame, engine and radiator keeping them raised up and away from the tarmac in the event of a crash or drop.
This kit requires NO modification to the fairing bodywork to install. Easy to install they utilise our own specially engineer brackets mounting directly onto frame and engine mounts and replacing existing engine bolts with our own specially formulated bolts, stainless steel brackets and spacers.
Fitted with a removable end cap which hides the bobbins fittings, this sleek new design looks superb and is a winner on road and track!
Compatable with the following Models:
Daytona 675(2013-)
SKU: RG-CP0332BL-D675
Evotech Street Triple 765 RS Pillion Footpeg Removal Kit (2023+)
Evotech Performance footrest blanking plates for the Street Triple 765 range of bikes.
Remove the original pegs and install our plates to full the void and stop debris entering the motorcycle.
All fixings are included in the kit.
Compatible with the following models:
- Street Triple 765 RS (2023+)
SKU: PRN016347-016371-01
Evotech Evo Short Clutch and Brake Lever set - Street Triple 765 RS (2023+)
Features of EP Evo Short Clutch & Brake Lever Set
EP EVO lever blades are shorter than the OE equivalents and commonly referred to as “two-finger levers”.
Usable lever width is 55mm approx. to easily accommodate two gloved fingers.
The “short-length” style reduces the chances of contact with a solid object and breaking.
Six-position adjustment span to suit varying finger lengths on both levers via an anodised adjuster.
17mm typical (+/- 1mm) lever span adjustment range (measured at lever midpoint).
Lever blade and bracket mount union machined from billet aluminium.
Stainless steel CNC-machined clevis pins and retaining clips and, where supplied, piston adjustment screw/barrel and tension retaining spring.
Durable black anodise finish on lever blades and bracket mount unions.
Red durable anodise finish on span adjusters.
Compatible with the following models:
- Street Triple 765 RS (2023+)
SKU: PRN002407-004290-016562-05
Evotech Garmin Sat Nav Mount - Tiger 900 (2020-2023)
Features of EP Garmin Compatible Sat Nav Mount for the Triumph Tiger 900.
Attaches to the screen support framework.
Sat nav bracket is machined from lightweight aluminium and given a robust powder-coating.
Full easy to follow fitting instructions can be found on this web page.
Kit includes all required fixings.
Precision designed to suit Gamin Zumo mounting system.
N.B. Garmin motorcycle sat nav not included.
Compatible with the following models:
- Tiger 900 (2020-2023)
SKU: PRN014566-014925
mo.blaze Tens 3 (3in1 Unit) Black Anodized
(SOLD AS A SINGLE UNIT) One of the smallest surface-mounted indicators in the world. Its tiny dimensions and minimalist design make it disappear from the vehicle. Thanks to Intensi LED® Technology, it is extremely bright and cannot be overlooked.
SKU: 6006010
Motone Bates Style Bottom Mount Headlight Bracket
This sale is for a bottom mount headlight bracket as pictured IN BLACK. Includes bolts as pictured.
Allows you to fit a bates style or any other bottom mount headlight to your bonnie without any drilling.
We made this version with a slotted vertical hole, allowing precise adjustable fitment of the headlight on the vertical axis so you can properly line it up with the tank and the lines on the rest of the bike.
Headlight mount slotted hole is machined to take a bates light with 10mm thread.
Bracket mounts in place of where the stock regulator sits so no drilling required to fit.
Regulator also needs to be relocated to the frame rails or elsewhere - we also make a bracket for this.
For those wanting to use the part for a custom application (non-triumph) the distance between the 2 slotted horizontal bolt holes centre to centre is 85mm (3.34 inches)
Compatable with the following Models:
Bonneville T100
Bonneville T120
Street Twin
Street Cup
Street Scrambler.
SKU: PTS004B
Motone Points ACG Cover/Badge - Union Jack - 2 Tone Brass & Black
SOLID BRASS ENGINE BADGE - 2 Tone - BLACK and BRASS
Krackle Black and Polished Brass
This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs) - The smaller of the two round engine covers. Clutch Side Badges/Covers are also available.
Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today:
- Street Twin
- Street Cup
- Street Scrambler
- Scrambler 1200
- Bonneville Bobber
- T100
- T120
- Thruxton
- Speedmaster
- Speed Twin
SKU: MMU548
Motone Billet Ring Adapter for fitting Gas Caps
If you have tried to swap your fuel cap out from the stock "monza" on your Thruxton 1200/Speed Twin/Scrambler 1200 tank you will have found that you have been left with a strange notched ridge that is welded into the top of the tank.
Up until now your only choice was either ignore it or grind it off. We have machined these snap-fit ring adapters out of billet to take care of this problem for you. This sale is for the ring adapter piece only cnc machined out of 6061-t6 aluminium. Suitable for use in combination with any Motone Monza or Billet Gas Cap
Compatible with the following models:
- Speed Twin
- Thruxton
- Scambler 1200
SKU: MMU554
Motone Plug and Play Wiring Harness Adapter
:Wiring loom adapter to save you having to splice the factory cables.
:Plug and Play with bullet/spade connectors as pictured. Long enough for use for custom tail lights in stock position as well as further forward on tail tidy.
:Designed for positioning turn signal indicators either at the shock mount or under-seat position or on the rear mudguard.
Wired as follows :
long Red is running light
long Blue is brake light
long Black earth
Orange is left indicator
Brown is right indicator
Red wire double connector - this is for turn signals that are dual filament with 3 cables (so they can act as running lights as well as turn signals) - Many turn signals dont have this functionality hence usage of this connector is optional.
Compatable with the following Models:
T100/SE/SCRAMBLER/THRUXTON : 2001-2015 Present
SKU: DDM002B
Motone Clutch (LHS)Cover/Badge - Union Jack - 2 Tone Brass & Black
SOLID BRASS ENGINE BADGE - 2Tone Brass & Black Finish : Krackle Black with Polished Brass Top Face
This cover is for the CLUTCH side (the larger round badge on the left hand side of the bike)
Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today:
- Street Twin
- Street Cup
- Street Scrambler
- Scrambler 1200
- Bonneville Bobber
- T100
- T120
- Thruxton
- Speedmaster
- Speed Twin
SKU: MMU549
Motone Regulator/Rectifier Frame Rail Relocation Bracket
Custom CNC milled from aviation grade billet 6061t aluminum. This sale is for the complete regulator/rectifier relocation bracket as pictured. Includes all stainless fixing and nylocs.
Helps tidy up the front end of your bonnie and allows you to move the regulator back to forward frame rails.
Simple bolt-on part - no rewiring required.
Compatible with the following models:
- HINKLEY BONNEVILLE T100
- SE
- SCRAMBLER
- THRUXTON : 2001-2015 Present - Fits both CARB and EFI bikes.
SKU: PTS003B
Motone Scrambler 1200 Light Bracket - Gloss Black
Light Bracket for Scrambler 1200 - listed here as the Light Bracket only so you can pick and mix different options to suit
High Pressure Die Cast Aluminium - GLOSS BLACK - To be Combined with any of the following Lights:
- ELDORADO
- BEL-AIR
- LECTER
- CUDA
- BIG FIN
SKU: MEL027
Motone Shock Absorber Finishers/Dress Up Kits - Black
Custom CNC milled from aviation grade billet 6061t aluminium.
A simple yet elegant solution to improve the look on the top and bottom shock mounts over the factory Triumph setup.
Includes all stainless bolts.
Compatible with the following models:
- HINCKLEY BONNEVILLE T100
- SE
- SCRAMBLER
- THRUXTON : 2001-2015 Present - Fits both CARB and EFI bikes
SKU: OTSX4015B
Motone Shock Mount Indicator Brackets V2 - Work with all Indicators
New Shock mount 2.0 Indicator brackets will work on many different types makes and models of bikes with capability to mount pretty much any known Aftermarket Indicator out there (8 or 10mm Thread no problem)
Triumph OEM (Factory Original) Type Indicators
Can be fit on outside or inside of Shock depending on the type of shock you have
Includes blanking plates if not using the OEM holes. Each bracket can be fit on either side of the bike. Made out of Stainless Steel and Powder Coated in Black.
Compatible with the following models:
- Bonneville all versions 2001-2016
- Thruxton 900 all versions 2004-2016
- Scrambler 900 all versions 2006-2016
- Speedmaster 900 all versions 2003-2017
- Bonneville T100 all versions 2017+
- Bonneville T120 all versions 2016+
- Street Twin 2016-2022
- Speed Twin 900 (2022+)
- Street Cup 2017-2019
- Street Scrambler 2017-2022
- Scrambler 900 (2022+)
- Speed Twin 1200 all versions 2019+
- Thruxton 1200/R (2016-2021)
- Thruxton RS (2019+)
- Rocket III all versions 2004-2017
- Not suitable for Scrambler 1200 all versions 2019+.
SKU: MMU585
Motone Sidewinder Eldorado Black - Side Mount License Plate Kit - LC
This is our new Kit for mounting the number plate onto the Side of your Bike
This specific version of the Kit is tailored to fit:
- T100
- T120
- Street Twin
- Street Cup
- Street Scrambler
It may well fit some other models (Speed Twin Eur4 /Thruxton Eur 4) but we need to do some experiments first and will update
Kit consists of the Sidewinder Lit Edition - an Eldorado Light in matching Krackle Black, and an extended Plug and Play Loom adapter
The Loom adapter is designed to work with Motone or aftermarket Indicators (ie they terminate in a 3.9mm Bullet connector)
SKU: MMU600+DDM019+MEL021
Motone Rear Fender Tail Light Mount Bracket - Black
Suitable for Motone Bel Air, Eldorado & Big Fin custom tail lights
Includes Rubber Gasket + Stainless Mounting Bolts
Diecast Aluminium with a Black Finish
SKU: MEL012
Motone TPS Carb/Throttle Body Cover - Pair - Ribbed/Finned - Raw Finish
Sold as a pair. Made using the same technology as the original equipment manufacturing process, high pressure die cast.
Suitable for any of the 1200 twins Compatible with the following models:
- T120
- Thruxton R
- Thruxton S
- Bobber
- Speedmaster
- Scrambler 1200
Sold here in Raw metal finish - this finish sits well with the stock carb bodies themselves as pictured
The covers come with 6 brass bolts similar to those found on the original monobloc Amal carbs, which were of course the inspiration for the look of the throttle body that Triumph has employed on these motors - fitment of the brass bolts is optional - you can also reuse your stock silver bolts.
SKU: MMU057
