Products tagged with 'Motone'
Motone HIGH-TAIL Custom Mudguard Black Anodised - LC
This is our High-Tail rear mudguard available here in brushed/Black Anodised finish
The high tail mudguard exits at the top of the frame of your bike - this means that it only works on the T120/T100 when with in conjunction with a custom seat (for example any of the Motone seats like the Viper or the Rattler) but not on the stock seat on the T120/T100 which has an overhang at the rear of the frame.
Street Cup/Street Twin/Street Scrambler stock seats do not have this issue.
Machine rolled out of 5052 Aluminium, Trimmed, Drilled and then Black Anodised - this rear mudguard is bolt-on for your Triumph Bonneville.
This version of the fender comes pre drilled ready to mount any of the Motone Fender Mount Light Kits (Eldorado, Bel Air, Lecter, Cuda, Big Fin etc)
It also has a hole for wiring loom (we recommend our part code DDM012) to pass through
Compatible with the following models (2016 and Up):
- Bonneville T100
- Bonneville T120
- Street Cup
- Street Twin
- Street Scrambler
Fender measures 570mm (22.5 inches) long measuring along the circumference from front to back. 180mm in width (7 inches)
Does not include the Tail light or numberplate bracket
SKU: MTE178
Motone Rear Fender Tail Light Mount Bracket - Black
Suitable for Motone Bel Air, Eldorado & Big Fin custom tail lights
Includes Rubber Gasket + Stainless Mounting Bolts
Diecast Aluminium with a Black Finish
SKU: MEL012
Motone Lecter Tail Light - LED - Black
Full SMD-LED circuit board.
Works as Running Light, Brake Light and Number plate illumination through window on underside.
Diecast Aluminium finished in BLACK
Designed to look good on all kinds of cafe racers, hot rods, bobbers etc.
Wired as follows :
- Yellow = RUNNING light
- Red = STOP light
- Black = Earth
SKU: MEL015
Motone TRILINE Billet Bar End Mirror - TYPE S (80mm) - Bar End - PAIR
Stealth Triline Design
80mm Mirror Head
6061-T6 Billet Aluminium Body
BLACK ANODISED MATTE FINISH
Hard Scratch Resistant Automotive Glass
R1400 Convex Reflective Glass
Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars Type
All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass
SKU: 2XMRR003
Motone TURISMO Billet Bar End Mirror - TYPE S (80mm) - Bar End - PAIR
ULTRA THIN 4mm Mirror Head
6061-T6 Billet Aluminium Body
BLACK ANODISED GLOSS FINISH
Hard Scratch Resistant Automotive Glass
Convex Reflective Glass TuV Glass
Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars
All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass)
SKU: 2XMRR004
Motone Black LC Pannier/Luggage Rail - Right Hand Side - Black
Motone Quality :
Built from 16mm Diameter Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness
Investment Cast Brackets
Smooth Welds
Black Powder Coat
High Quality Pannier Rail (Right Hand Side ONLY) with Investment Cast brackets in type 304 Stainless Steel - Black Powder Coat
Compatible with the following models:
- Triumph T100 2017 and up,
- Triumph T120 2016 and up,
- Triumph Street Twin 2016 and up,
- Triumph Street Scrambler 2017 and all further years and up(though obviously LHS only if high pipes).
- Triumph Street Cup and all further years and up.
SKU: MCB002RH
