Uni Filter Tiger 800 Prefilter (2015-2019)
Replaces the original air box inlet tube. Stops 90-95% of the dust from reaching the main filter and in turn providing a much longer service interval for the main filter.
Compatible with the following models (2015-2019):
- Tiger 800 XCX
- Tiger 800 XCA
- Tiger 800 XRX
SKU: AU3705
Uni Filter Tiger 800 Prefilter (2011-2014)
Pre-Cleaner to replace intake snorkel. Removes 95% of the dust before it reaches the main air filter. Fits both ABS and Non ABS models.
This Pre-Cleaner is easy accessible when the seat is removed. The Pre-Cleaner is easily serviced.
Compatible with the following models (2011-2014):
- Tiger 800
- Tiger 800XC
SKU: NU3704
Tiger 900(2020-2023) - Speedo Angels Screen Protector
Made from high quality anti-scratch material, this screen protector kit has been designed to protect your instrument cluster/dashboard from unwanted scratches and marks.
This kit contains 2 ultra-clear and 2 anti glare screen protectors and a fitting kit.
Ultra-Clear:
Provides scratch resistance and protection whilst being almost invisible once applied.
Anti-Glare:
Provides the same scratch resistance and protection as our Ultra-Clear protectors, but also helps to remove the glare/reflections associated with LCD/TFT dashboards. Anti-glare protectors have a matte appearance once fitted. If anti-glare is not listed then it is not currently available. Please note that our anti-glare screen protectors work by reducing the amount of light that is transmitted through the dashboard and on some dashboards they can reduce the brightness/clarity of the screen slightly.
Also in the kit:
1 x Squeegee / Smoothing card
1 x Suede polishing cloth
1 x Dust removal strip
Compatible with the following models:
- 2020-2023 Tiger 900 models
SKU: SATR1722
Tiger 900(2024+) and Tiger 1200(2022+) - Speedo Angels Screen Protector
Made from high quality anti-scratch material, this screen protector kit has been designed to protect your instrument cluster/dashboard from unwanted scratches and marks.
This kit contains 2 ultra-clear and 2 anti glare screen protectors and a fitting kit.
Ultra-Clear:
Provides scratch resistance and protection whilst being almost invisible once applied.
Anti-Glare:
Provides the same scratch resistance and protection as our Ultra-Clear protectors, but also helps to remove the glare/reflections associated with LCD/TFT dashboards. Anti-glare protectors have a matte appearance once fitted. If anti-glare is not listed then it is not currently available. Please note that our anti-glare screen protectors work by reducing the amount of light that is transmitted through the dashboard and on some dashboards they can reduce the brightness/clarity of the screen slightly.
Also in the kit:
1 x Squeegee / Smoothing card
1 x Suede polishing cloth
1 x Dust removal strip
Compatible with the following models:
- 2024+ Tiger 900 models
- 2022+ Tiger 1200 models
SKU: SATR2122
New Rage Cycles Triumph Bobber Standard Tail Tidy
Take your Triumph Bobber to the next level with our DIY fender eliminator. NRC kit comes with a complete LED tail light, license plate bracket, and LED license plate light for a full LED replacement. This most popular Triumph model required a design with a creative twist to it. Why not add to the styling with our unique and creative design? Comes with all necessary hardware to install, and OEM connectors to make for a simple bolt-on / plug-in fender eliminator.
Installation requires you to drop the rear wheel to slide out the axle if you have the standard fender.
Compatible with the following models:
- Bobber (2017 upwards)
SKU: TBFE
New Rage Cycles Triumph Bobber Tail Light
Take your Triumph Bobber to the next level with our DIY fender eliminator. NRC kit comes with a complete LED tail light, license plate bracket, and LED license plate light for a full LED replacement. This most popular Triumph model required a design with a creative twist to it. Why not add to the styling with our unique and creative design? Comes with all necessary hardware to install, and OEM connectors to make for a simple bolt-on / plug-in fender eliminator.
Installation requires you to drop the rear wheel to slide out the axle if you have the standard fender.
Compatible with the following models:
- Bobber (2017 upwards)
SKU: BOBBER-TL
New Rage Cycles Triumph Thruxton 1200 Fender Tail Tidy
The 2016 Triumph Thruxton has been redesigned, and we were ready for it! Our fender eliminator offers you an integrated tail light with unmistakably bright LED turn signals, brake light, and license plate light.
Fully plug-and-play!
Compatible with the following models:
- Thruxton (2016 Upwards)
SKU: THRUXTON16-FE-T
TEC Bike - Speed 400 and Scrambler 400X - Adjustable Lever Set (short)
We have seen a lot of levers for sale for the 400 Triumph models on Ebay and Amazon (some are cast and not machined from billet alloy), these are not quite correct as they are rebranded KTM 390 levers. The KTM front brake lever is the same but the reach on the clutch lever is different. If the KTM lever is used you will find the reach too long even on the shortest setting. This is easy to check as the KTM type lever has a different part number. The Triumph 400 clutch lever should be stamped with the correct number is S40-L.
These TEC levers have been ergonomically designed for comfort, and we have specially made these for the 400 Triumph models
Available in short or long lever lengths, choose type in drop down option
Top quality CNC machined from billet alloy (not cast alloy like some cheap types online)
Anodised for durability in Black to match your bike
6 position reach adjustment with click indent
Can easily be adjusted even with gloves on Supplied as a pair of 1 x brake lever and 1 x clutch lever.
SKU: LEVER-BLK-S40-L/FK12-SHORT
TEC Bike - Speed Twin 1200 - Adjustable Radial Lever Set (Long)
These are our TEC CNC long alloy levers; designed to look better and be more ergonomic than the stock levers.
Featuring an easy to use wide range reach adjustment.
Beautifully machined from solid alloy billet and black anodised for a durable finish.
6 x position reach adjustment can easily be adjusted with gloves on.
Comfortable design and great for riders with shorter fingers.
Supplied as a pair of 1 x brake lever and 1 x clutch lever.
SKU: T333P-F11RadialBlack
TEC Bike - Thruxton R 1200 - Adjustable Radial Lever Set (Long)
We find the 1200 Thruxton R standard levers annoying as they are odd and clearly from different suppliers with different lengths, shape, look, and awkward adjustment methods.
These are our TEC CNC long alloy levers; they look great and are far more ergonomic than the stock levers.
Featuring an easy to use wide range reach adjustment.
Beautifully machined from solid alloy billet and black anodised for a durable finish.
6 x position reach adjustment can easily be adjusted with gloves on.
Comfortable design and great for riders with shorter fingers.
Supplied as a pair of 1 x brake lever and 1 x clutch lever.
SKU: T333P-F11RadialBlack
TEC Bikes Pair of Air Injection stainless blanking plugs
Pair of neat stainless blanking plugs and sealing washers for the air injection ports on the cylinder head.
Helps prevent ‘Blueing’ of pipes and popping on the overrun.
Highly recommended with aftermarket exhausts.
Can also be used to blank off lambda sensor holes in the exhaust.
SKU: AL-PLUGS
TEC bikes Lowering Springs – Scrambler 1200 XC/XE
A pair of specially made lowering springs for the Triumph Scrambler 1200 XE/XC models.
Will lower the rear static ride height approximately 25-35mm with an average weight solo rider.
Top-quality UK manufactured springs.
Powder coated, hard wearing, semi-gloss finish.
Very easy to install with no special equipment required.
NOTE – These springs fit Ohlins type shocks only, NOT Marzocchi, which are used on 2024 models.
SKU: LOW-SPR-1200
TEC Bike - Bonneville Liquid-Cooled Models - Adjustable Lever Set
TEC CNC Alloy Adjustable Front Brake & Clutch Long Lever Set – black/titanium.
Important-note these are slightly different to the early air cooled models as the switches in the lever perches are located underneath and not inside. Thruxton (Does NOT fit Thruxton R) – Year 2016 onwards (we have another listing for Thruxton R/ Speed Twin etc with Radial type levers)
Compatible with the following models:
- Street Twin – Year 2016 onwards,
- Street Scrambler – Year 2017 onwards,
- Thruxton (Does NOT fit Thruxton R) – Year 2016 onwards
- T100 – Year 2017 onwards,
- T120 – Year 2016 onwards,
- Bobber,
- Speedmaster 1200
The kit features:
6 position click adjustable for reach. CNC machined from alloy. Easily adjusted whilst riding with gloves on. Long levers for easy grip. Easy & quick to fit. Makes the bike much more attractive than stock levers.
SKU: ADJ-LEVERS-BLK-LC
TEC Bike - Bonneville Air Cooled Models - Adjustable Lever Set
Compatible with the following models:
- Speedmaster – 2006-2016,
- Thruxton – 2004-2015,
- Scrambler – 2006-2016,
- Rocket III Classic – 2010-2015,
- Rocket III Roadster – 2010-2015,
- Rocket III – 2004-2007,
- Tiger 1050 & Sport – 2007-2015,
- Tiger 800 & XC – 2011-2015,
- Bonneville & Bonneville SE & Bonneville T100 – 2006-2015,
- Daytona 600 & 650 & 955i – 2004-2006,
- Sprint ST & GT & RS – 2004-2015.
The kit features:
6 position click adjustable. Easily adjusted whilst riding with gloves on. Long levers for easy grip. Easy & quick to fit. Makes the bike much more attractive than stock levers.
SKU: ADJ-LEVERS-BLK-AC
Triumph High Mudguard Kit
The Scrambler Inspired high level mudguard is injection moulded and has a colour-coordinated finish to perfectly match your ride. Includes the black, textured, short lower mudguard. Suitable to be installed along with the mudguard extension.
This kit includes the black, textured, short lower mudguard, perfectly colour-coordinated to blend seamlessly with your bike's design. The lower yoke mounted design ensures a precise fit for the Scrambler 400 X, removing the front section of the lower mudguard to enhance the bike's sporty and aggressive look.
Compatible with the following models:
- SCRAMBLER 400 X
SKU: 36TA0026
Triumph Rear Bullet LED Indicators
The piano black moulded body with turned aluminium bezel incorporates 6 High Power LEDs which make signalling highly visible in a compact 40mm diameter body
Sold as a pair, they offer a comprehensive solution to upgrading your motorcycle's lighting.
Compatible with the following models:
- Speed 400
- Scrambler 400X
SKU: 36TA0027
Triumph Lower Engine Bars
The Triumph lower engine bars are constructed using tubular mild steel and come in a classy black textured finish
They offer additional protection in the event of a fall and compliment the overall styling
They can be mounted individually or with the upper bars
Compatible with the following models:
- Scrambler 400 X
- Speed 400
SKU:36TA0032
Triumph Tank Pad
A self-adhesive, durable rubber tank pad that protects the tank from zip scuffs and wear
Features Triumph branding and complements the lines of the fuel tank
Compatible with the following models:
- Scrambler 400
- Speed 400
SKU: 36TA0033
Triumph Luggage Rack Kit
The contemporary styled, aluminium luggage rack and grab handles offer the opportunity to carry your essentials, and also give your pillion rider added comfort
Maximum payload of 5kg
Compatible with the following models:
- Scrambler 400 X
- Speed 400
SKU: 36TA0035
Triumph Upper Engine Bars
Triumph Upper Engine Bars constructed from tubular mild steel to provide extra protection and style to your bike
Their versatile design allows for individual mounting or pairing with the lower bars, offering comprehensive safeguarding for the bike’s critical components.
Compatible with the following models:
- Scrambler 400X
- Speed 400
SKU: 36TA0038
Triumph Coated Screen
The polycarbonate flyscreen is injection moulded and hard coated for durability and optical clarity and offers increased wind protection
Compatible with the following models:
- Scrambler 400X (Requires Fitting Kit 36TA0058)
- Speed 400 (Requires Fitting kit 36TA0041)
SKU: 36TA0040
Triumph Knee Pads
A durable, self-adhesive rubber knee pad which offers additional protection to the side of the tank from scuffs and scratches, increasing rider comfort and grip
With Scrambler inspired styling and featuring embossed Triumph logo detail and a textured black finish
Compatible with the following models:
- Speed 400
SKU: 36TA0043
Triumph Bar End Mirrors Kit
Designed to provide clear and reliable rearview visibility. Crafted from cast and machined aluminium, these bar end mirrors exude durability and precision. The sleek black anodized finish not only provides a modern aesthetic but also enhances corrosion resistance, ensuring long-lasting quality in various riding conditions.
Compatible with the following models:
- Scrambler 400 X
- Speed 400
SKU: 36TA0043
Triumph Headlight Grille and Bezel
The headlight grille not only exemplifies the signature Triumph style but also serves a practical purpose by ensuring optimal protection for your motorcycle’s headlight. Crafted with a durable moulded construction.
Compatible with the following models:
- Speed 400
SKU: 36TA0046
Triumph Front Bullet Indicators
The piano black moulded body with turned aluminium bezel incorporates 6 High Power LEDs which make signalling highly visible in a compact 40mm diameter body
Sold as a pair
Compatible with the following models:
- Scrambler 400 X
- Speed 400
SKU: 36TA0049
